news detail

The correct use of the shredder | crumbing machine

The correct use of the shredder | crumbing machine
1. The pulverizer and power unit should be installed firmly.

2. After the grinder is installed, check the fastening of the fasteners, and tighten them if they are loose. At the same time, check whether the belt tightness is appropriate.

3. Before starting the pulverizer, turn the rotor by hand to check whether the claws, hammers and the rotor are running flexibly and reliably, whether there is any collision in the shell, and whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow of the machine. Whether the machine lubrication is good.

4. Don't change the pulley casually.

5. After starting the grinder, it should be idling for 2~3 minutes, and then feeding work after there is no abnormal phenomenon.

6. Pay attention to the operation of the shredder at all times during work. The feeding should be even to prevent blocking the car, and do not overload the work for a long time. If there are vibrations, noises, excessive temperature of the bearings and the body, or spraying materials, the machine should be shut down for inspection immediately, and the work can be continued after troubleshooting.
crumbing machine