What is the reason for the heat of the vibration screen?
The vibration screen bearing works under the action of heavy load and large centrifugal force, so the general heating phenomenon is more obvious. If the bearing temperature is too high, it may be caused by the following reasons.
(1) Unreasonable selection of bearing types
If in the process of using the vibration screen, the bearing of the exciter is frequently overheated and the conditi...
Conveyor | Conveyor belt deviation causes and solutions
Belt misalignment is one of the most common faults when the belt is running. There are many reasons for the deviation, the main reasons are low installation accuracy and poor daily maintenance. During the installation process, the head and tail rollers and the middle idler should be on the same center line as much as possible, and they should be parallel to each other to ensure that the conveyor b...
conveyor belt classification
Conveyor belts are generally classified according to the presence or absence of traction elements.
A conveyor belt with a traction member generally includes a traction member, a bearing member, a driving device, a tensioning device, a redirecting device and a supporting member. Traction parts are used to transmit traction force, and can use conveyor belts, traction chains or steel wire ropes; l...
The composition and introduction of conveyor belt
The conveyor belt is the carrier medium of the conveyor system, and it is one of the most widely used conveyor systems. It is to provide power to one or more pulleys to move the belt and the material on the belt forward along the system.
So what is the conveyor belt made of? Conveyor belts normally consist of one or more layers of material. Conveyor belts with different thicknesses and patterns...
Conveyor belt principle
The principle of the conveyor belt is simply a flat conveyor belt and a climbing conveyor belt that drive the conveyor belt through two rollers. One is the driving wheel, which cooperates with the guiding power of the motor, and the other is auxiliary tensioning. The middle part is mostly smooth stainless steel plane.
There are many kinds of conveyor belts available in the industry, mainly incl...